Pony - Oto Boyama ve Kurutma Kabini

CABINE DIMENSIONS (Except heat unit)
Length inside/ outside	: 15000 / 15200 mm
Width inside/ outside	: 5000 / 5120 mm
Height inside/ outside	: 5000 / 5600 mm

PROPERTIES OF PANEL
Thickness of sheet-iron	: 1mm Galvaniz outside surface is special sheet-iron with paint.
Tkickness of insulation	:70 mm. Glass wool with (cabine trunk and heat unit are in it.)

AIR CIRCULATION
Absorbtion fan	: 10 H. P. - 23.000 m3 / h x 2
Exhaust fan	: 10 H. P. - 23.000 m3 / h x 2
Air speed in the cabine	: 0.22 m/ second

AIR FILTERS
Kind of front filter	: DIN 24185 EU 4 Suitable
Kind of ceiling filter	: DIN 24185 EU 5 Suitable
Kind of floor filter	: DIN 24185 EU 3 Suitable
Kind of Exhaust filter	: DIN 24185 EU 3 Suitable

HEATING
Oil burner heating power	: 250.000 kcal / h
Type of oil	: Motorin

ELECTRIC
Total power	: 45 kw ( max) , 380 volt 50 Hz.
Lighting power	: 156 pieces of florescent lamb with 40 watt. (There are four group Lighting on top of the booth and on the right and left side walls)
Type of mounting	: Can be reconstracted

PLATFORM

There is no metal basement

TYPE OF MOUNTING

Can be reconstracted

1.1 MAIN

This type is produced by 1 mm. Galvaniz tin plate and 70 mm. Reinforced wall which is insulated by glass wool and the outer sideface of the pannel is painted by static powder paint it may causes more long life and ergonomical appearance

By the painting time the maximum color control might be this head light desing by this model.
There are 156 pieces 40 W lamb in this model. In the cabin, there is a railed hanger system which is hanged to ceiling and provides to dye the parts near the automobile.

Ceiling is made of tin plate panels which are reinforced with private isolation and it provides walking during the repairing studies.

A long lasting filter element which is made of unflameable substance and has private and high performance, is placed under the ceiling, in order to clean the air given into the cabin.

In front of the cabin there is are 2 doors for the enterance of tankers and one door for the enterance and exit of personnel. Door elements have observing windows made of security glasses.

1.2 AIR SEEDING UNIT

This unit gives the filtered and fresh air to the cabin and throw away the used air from the cabin troughout dying, and it heats the air upto 80 degres and gives it through the cabin, and mixtures the used air with 10 % fresh air (by otomatic multidanper ) throughout drying, finally, by reheating it cycles the air.

The heating of the air can be provided by 2 motorin oil burners with the capacity of 250.000 kcal/ h , and by a heat exchanger which is manufactured from 304 guality stainless steel tin plate.In the first operation , increasing the air heat upto 60o C given the heated or unheated into the cabin or cycling is provided by two industrial fans with each capacity of 23.000 m3/ h. After air is passed from a prefilter in this unit, then it is transfered to cabin. Further more, exit air controled by a damper which is avaible in the exit air channel.

1.3 1.3 ELECTRIC SYSTEM

Electric and Command Table

Devices which are ready to operate : 380 v. 50 Hz. voltage of control devices is 220 volt. All electric installation will be founded according to the valid electric conditions in Turkey. Three fase electric which is needed for the devices requested, will be brought by our firm upto to the place where table will be put.

ELECTRIC INSTALLATION

Command and control assembles which come from electric table and go to motors and electrical devices, will be made from cables which are resistant to heat. Electric lines, foundation and their changes will be placed in an easy way.
Devices which are ready to operate : 380 v. 50 Hz. voltage of control devices is 220 volt. All electric installation will be founded according to the valid electric conditions in Turkey. Three fase electric which is needed for the devices requested, will be brought by our firm upto to the place where table will be put.

2.0 TRANSPORTATION - MOUNTING - ACCEPTANCE BY FIRM

Transportation

The devices will be delivered in our facility. If exportation is requested to be done by ARYA OTO SERVİS EKİPMANLARI SAN. VE TİC.LTD.ŞTİ. , the exportation and transportation costs will be paid by your firm.

2.1 Mounting and Acceptance by Firm

To place the devices in areas which are previously prepared for mounting according to the project, issued by us and the including to the firm, will be done under the authrity of a technician.

The electricity of the devices till the electricity panel and the pressure air to the available connection, the supply of the motorin lines will be done by you and the connection of these lines will be done by our tecnician.

All construction issuances, including ( chimney crosings ) which are neccessary before the mounting and during the mounting, and motorin stock tanks and etc. will be done by your company.

2.2

For a first few mounting , a person would be send to the your country, in which the mounting will be done. The customer will supply 2 or 3 personnels for assistance. In this time you will found your service and assembly team.

2.3

All expenditures of our person, who will send to the country in which the mounting will be done, including , flight tickets , feeding and residance will be captured by your company.

3.0 DELIVERY CONDITIONS

Ex works

All deliveryies and mounting are captured by our ''GENERAL SALES AND MOUNTING CONDITIONS ''.