Side walls are manufactured from 1 mm tin plate which glass side is insulated with 50 mm thichness.The exterior surfaces of panels are dyed with exported static powder paint in order to provide an ergonomical apperance and longer life duration.

İt has a lighting system which is designed to raise the colour control to its best, throughout painting. Lighting is provided with 40 guantity Florescent lamb with 40 W.

In the cabin, there is a railed hanger system which is hanged to ceiling and provides to dye the parts near the automobile .

Ceiling is made of tin plate panels which are reinforced with private isolation, and it provides walking during the repairing studies.

A long lasting filter element which is made of unflameable substance and has private and high performance, is placed under the ceiling, in order to clean the air given into the cabin.
In front of the cabin there are 4 doors for the enterance of cars and one door for the enterance and exit of personnel. Door elements have observing windows made of security glasses.
Base is made of steel constraction which provides the all system to mount into an exist concrete ground. On steel constraction, a galvanized grate and a chequered tin plate ststem, which can carry 650 kg. wheel weight and increase the dust flowing, is placed.

In our standart models, there is a loading platform with 400 mm height.

Electric and Command Table

It is a table which motor and devices captured by reconciliation are commaned and controled from a center in order to make their functions.
Table is manufactured from Galvaniz tin plate and steel profile, which is resistant to strokes, completely closed and never transfers dust and moisture.

Table include all motors, the neccessary breaker and fuse for the electrical devices,and in the neccessary conditions, signal lambs, termic roadcast, and clemens.
Moreover, heat indicator and termostat which adjusts the kiln heat and a time roadcast which kiln-dry time is adjusted, are added to the control table.

Command and control assembles which come from electric table and go to motors and electrical devices, will be made from cables which are resistant to heat. Electric lines, foundation and their changes will be placed in an easy way.

Devices which are ready to operate : 380 v. 50 Hz. voltage of control devices is 220 volt. All electric installation will be founded according to the valid electric conditions in Turkey. Three fase electric which is needed for the devices requested, will be brought by our firm upto to the place where table will be put.

To place the devices in areas which are previously prepared for mounting according to the project, issued by us and the including to the firm, will be done under the autity of a technician.

The electricity of the devices till the electricity panel and the pressure air to the available connection, the supply of the motorin lines will be done by you and the connection of these lines will be done by our tecnician.
All construction issuances, including ( chimney crosings ) which are neccessary before the mounting and during the mounting, and motorin stock tanks and etc. will be done by your company.

All deliveries and mounting are captured by our ''GENERAL SALES AND MOUNTING CONDITIONS ''.